SanDisk Develops World’s Smallest 128Gb NAND Flash Memory Chip

  • Highest-capacity single die NAND flash memory chip extends leadership in three-bit per cell technology
  • Paper outlining achievement to be delivered at technical conference
International Solid-State Circuits Conference (ISSCC)

MILPITAS, Calif.--()--SanDisk Corporation (NASDAQ: SNDK), a global leader in flash memory storage solutions, today announced it has developed the world’s smallest 128 gigabit (Gb)* NAND flash memory chip currently in production. The semiconductor device can store 128 billion individual bits of information on a single silicon die 170mm2 in size – a little more than a quarter of an inch squared, or smaller than the area covered by a U.S. penny.

The use of NAND flash memory in high tech equipment like smartphones, tablets and solid state drives (SSDs) allows advances in the full function, small form factor devices that are highly valued by consumers. Shrinking the size of NAND flash memory allows smaller, more powerful computing, communications and consumer electronics devices to be built while keeping costs low.

SanDisk built the 128Gb NAND flash memory chip on the company’s industry-leading 19 nanometer (nm) process technology. A nanometer measures one-billionth of a meter, meaning that 19nm circuit lines are so small that about 3,000 of them could fit across the width of a human hair. The chip also employs SanDisk’s three-bit per cell (X3) technology that allows the company to build NAND flash memory products with the ability to read and write three bits of information in each memory cell.

At 19nm, SanDisk is deploying its ninth generation of multi-level cell (MLC) NAND products and fifth generation of X3 technology. This combination of manufacturing and technical expertise helps SanDisk pack more information into each memory cell making it possible to create a smaller, denser NAND flash memory chip.

“Building a 128Gb NAND flash memory chip with this level of complexity is an incredible achievement,” said Mehrdad Mofidi, vice president, Memory Design. “This innovation allows SanDisk to continue to be a leader in helping our customers deliver smaller, more powerful products capable of doing more at lower cost.”

In addition to reduced size, the 128Gb semiconductor device has an industry-leading X3 write performance of 18 megabytes (MB)** per second. This level of performance is achieved using SanDisk’s patented advanced all bit line (ABL) architecture and means that X3 technology could be extended to certain product categories that use MLC NAND flash memory. A technical paper outlining the breakthrough will be presented at the International Solid-State Circuits Conference (ISSCC) in San Francisco today.

The 128Gb NAND flash memory chip was developed jointly by teams from SanDisk and Toshiba at SanDisk’s Milpitas campus. The effort was led by Yan Li, director of Memory Design at SanDisk. Products based on the 128Gb three-bit per cell technology began shipping late last year and have already started to ramp into high volume production. SanDisk has also developed a derivative product based on the success of the 128Gb chip – a 64Gb, X3 NAND flash memory chip that is compatible with the industry-standard microSD™ format. The company has also started to ramp production of this additional chip technology.

NAND flash memory is the technology behind the high reliability, small form factor storage solutions that SanDisk sells to OEM customers for use in a wide variety of products such as smartphones, tablets and Ultrabooks. It is also the technology used in products SanDisk sells through its retail channel in the form of imaging and mobile cards, USB drives and mp3 players.

About SanDisk

SanDisk Corporation (NASDAQ: SNDK) is a global leader in flash memory storage solutions, from research and development, product design and manufacturing to branding and distribution for OEM and retail channels. Since 1988, SanDisk's innovations in flash memory and storage system technologies have provided customers with new and transformational digital experiences. SanDisk's diverse product portfolio includes flash memory cards and embedded solutions used in smart phones, tablets, digital cameras, camcorders, digital media players and other consumer electronic devices, as well as USB flash drives and solid-state drives (SSD) for the computing market. SanDisk's products are used by consumers and enterprise customers around the world.

SanDisk is a Silicon Valley-based S&P 500 and Fortune 500 company, with more than half its sales outside the United States. For more information, visit www.sandisk.com.

* 1 gigabit (Gb) = 1 billion bits. Some capacity not available for data storage.

** Based on internal testing; performance may vary depending upon host device. 1 megabyte (MB) = 1 million bytes.

© 2012 SanDisk Corporation. All rights reserved. SanDisk and the SanDisk logo are trademarks of SanDisk Corporation, registered in the United States and other countries. microSD is a trademark of SD-3C, LLC. Other brand names mentioned herein are for identification purposes only and may be the trademarks of their respective holder (s).

This press release contains certain forward-looking statements, including expectations for applications, features, production, markets and customers that are based on our current expectations and involve numerous risks and uncertainties that may cause these forward-looking statements to be inaccurate. Risks that may cause these forward-looking statements to be inaccurate include among others: the market demand for our products or the production of our products may grow more slowly than our expectations, or our products may not be available in the capacities that we expect or may not perform as expected, and the other risks detailed from time-to-time in our Securities and Exchange Commission filings and reports, including but not limited to, our quarterly reports on Form 10-Q and our annual report on Form 10-K. We do not intend to update the information contained in this press release.

Contacts

Media Contact:
SanDisk Corporation
Tom Beermann, 408-801-1443
tom.beermann@sandisk.com

Contacts

Media Contact:
SanDisk Corporation
Tom Beermann, 408-801-1443
tom.beermann@sandisk.com