Toshiba Expands Line-up of Embedded NAND Flash Memory Products for Automotive Applications

- Supports AEC-Q100 Grade2 Requirements -

Toshiba: e-MMC embedded NAND flash memory product for automotive applications supporting AEC-Q100 Grade2 requirements (Photo: Business Wire)

TOKYO--()--Toshiba Corporation’s (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of JEDEC e∙MMCTM Version 5.1[1] compliant embedded NAND flash memory products supporting AEC-Q100 Grade2 [2] requirements. The line-up offers densities of 8GB, 16GB, 32GB and 64GB. Sample shipments start from today with mass production scheduled for the second quarter (April to June) of 2017.

The new products integrate NAND chips fabricated with 15nm process technology with a controller to manage basic control functions for NAND applications in a single package. As a complement to Toshiba’s previous product group of e∙MMC, which deliver the operating temperature range of -40 to +85°C required by car infotainment applications, the new products support applications such as instrument clusters that require e∙MMC storage solutions to operate at higher temperatures up to +105°C.

In the automotive market, demand for NAND flash memory is continuing to grow alongside advances in car infotainment, ADAS [3] and autonomous driving systems. Toshiba is meeting this demand by reinforcing its line-up of high performance and high density memory products and will continue to take leadership in the market.

Toshiba is also developing automotive UFS [4] products that support AEC-Q100.

 

New Product Line-up

 
Part Number   Capacity   Temperature Range   Package
THGBMHG6C1LBAB6 8GB

-40℃ to +105℃

11.5x13x0.8mm
THGBMHG7C2LBAB7 16GB

-40℃ to +105℃

11.5x13x1.0mm
THGBMHG8C4LBAB7 32GB

-40℃ to +105℃

11.5x13x1.0mm
THGBMHG9C8LBAB8   64GB  

-40℃ to +105℃

  11.5x13x1.2mm
 

Key Features

1. Integrated NAND Flash Memory Management
The JEDEC e∙MMC Version 5.1 compliant interface handles essential functions, including writing block management, error correction and driver software. It simplifies system development, allowing manufacturers to minimize development costs and speed up time to market for new and upgraded products. Additionally, new features[5] standardized in JEDEC e∙MMC Version 5.1, such as BKOPS control, Cache Barrier, Cache Flushing Report, Large RPMB Write and Command Queuing, are applied to the new products to enhance usability.

2. Extended Temperature Range
Supports operating temperature range of -40°C to +105°C.
Toshiba also conducted additional reliability test to meet AEC-Q100 Grade2 specifications.

 

Key Specifications

 
Interface   JEDEC e∙MMC V5.1 standard

HS-MMC interface

Capacity 8GB, 16GB, 32GB, 64GB
Power Supply Voltage 2.7-3.6V (Memory core)

1.7V-1.95V, 2.7V-3.6V (Interface)

Bus Width x1, x4, x8
Temperature Range -40oC to +105oC
Package   153Ball FBGA

11.5mm x 13.0mm

 

Notes

[1]   e•MMCTM is a product category for a class of embedded memory products built to the JEDEC e•MMC Standard specification and is a trademark of the JEDEC Solid State Technology Association.
[2] Electrical component qualification requirements defined by the AEC (Automotive Electronics Council).
[3] Advanced Driving Assistant System
[4] Universal Flash Storage: Product category for a class of embedded memory products built to the JEDEC Standard specification.
[5]

“BKOPS control” is a function where the host allows the device to perform background operation when the device is idle. “Cache Barrier” is a function that controls when cache data is written to the memory chip. “Cache Flushing Report” is a function that informs the host if the device’s flushing policy is FIFO (First In First Out) or not. “Large RPMB write” is a function that increases the data size that can be written to the RPMB area to 8KB.

 

*The products are labeled based on their memory chip(s), not the amount of memory capacity available for data storage by the end user. Part of the capacity is reserved for device management. Please refer to the data sheet or your local Toshiba sales representative. (For purposes of measuring memory capacity in this context, 1GB = 1,073,741,824 bytes.)

Customer Inquiries:
Memory Marketing Division
Tel: +81-3-3457-3451
http://toshiba.semicon-storage.com/ap-en/contact.html

Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

About Toshiba

Toshiba Corporation, a Fortune Global 500 company, channels world-class capabilities in advanced electronic and electrical product and systems into three focus business fields: Energy that sustains everyday life, that is cleaner and safer; Infrastructure that sustains quality of life; and Storage that sustains the advanced information society. Guided by the principles of The Basic Commitment of the Toshiba Group, “Committed to People, Committed to the Future”, Toshiba promotes global operations and is contributing to the realization of a world where generations to come can live better lives.

Founded in Tokyo in 1875, today’s Toshiba is at the heart of a global network of 550 consolidated companies employing 188,000 people worldwide, with annual sales surpassing 5.6 trillion yen (US$50 billion). (As of March 31, 2016.)
To find out more about Toshiba, visit www.toshiba.co.jp/index.htm

Contacts

Media Inquiries:
Toshiba Corporation
Storage & Electronic Devices Solutions Company
Digital Marketing Department
Koji Takahata, +81-3-3457-4963
semicon-NR-mailbox@ml.toshiba.co.jp

Release Summary

Toshiba launched e∙MMC embedded NAND flash memory products supporting AEC-Q100 Grade2 requirements. Samples are available now with mass production scheduled for the second quarter of 2017.

Contacts

Media Inquiries:
Toshiba Corporation
Storage & Electronic Devices Solutions Company
Digital Marketing Department
Koji Takahata, +81-3-3457-4963
semicon-NR-mailbox@ml.toshiba.co.jp